Print Friendly Version of this pagePrint Get a PDF version of this webpagePDF

Wednesday 4 September 2013

Parts of a Sewing Machine and Their Functions | Different Parts of Hand Operated Sewing Machine

Basic Parts of a Sewing Machine and Their Functions:
The basic structure of sewing machine is the same whether it is hand-operated sewing, treadle sewing machine or electric sewing machine. The basic parts of a sewing are listed below and seen in Fig.
Parts of a Sewing Machine
1. Spool pin: It is fitted on top of the arm to hold the reel.

2. Thread guide: It holds the thread in position from the spool to the needle.

3. Tension disc: The two concave discs put together with the convex sides facing each other. The thread passes between the two. The tension of the thread is adjusted by a spring and nut which increases or decreases pressure

4. Take up lever: It is a lever fitted to the body of the arm. Its up and down motion feeds the thread to the needle and tightens the loop formed by the shuttle.

5. Needle bar: This is a steel rod to hold the needle at one end with the help of a clamp. Its main function is to give motion to the needle.

6. Bobbin case: This moves into position to catch the top thread and form the stitch as the needle is lowered into the bobbin chamber.

7. Presser foot: It is fixed to the presser bar to hold the cloth firmly in position when lowered.

8. Presser foot lifter: A lever attached to the presser bar for raising and lowering the presser foot.

9. Stitch regulator: This controls the length of the stitch.

10. Bobbin winder: A simple mechanism used for winding thread on the bobbin.

11. Fly Wheel: When this is made to revolve, it works the mechanism of the motion

12. Clutch or Thumb Screw: This is in the center of the fly wheel and it engages and disengages the stitching mechanism.

13. Slide Plate: A rectangular plate, which facilitates the removal of the bobbin case without lifting the machine.

14. Needle Plate or Throat Plate: A semi-circular disc with a hole to allow the needle to pass through it.

15. Feed dog: This consists of a set of teeth fitted below the needle plate. It helps to move the cloth forward while sewing.

16. Face plate: A cover which on removal gives access to the oiling points on the needle bar, presser bar and take-up lever.

17. Spool pin for bobbin winding: Spool of thread is placed on this at the time of bobbin winding. 

0 comments:

Post a Comment